Info: 'The LaserWriter IISC is printing a test page. Please wait for the printer to stop, turn it off, and set the SCSI ID number to a number other than 7, as described in the manual.'
DITL_-8172.txt
Items: (3 entries)
0:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 4
Info: ''
1:
Bounds: x1=380, y1=60, x2=444, y2=78
Type: 4
Info: 'Cancel'
2:
Bounds: x1=62, y1=7, x2=370, y2=80
Type: -120
Info: 'The LaserWriter IISC has a hardware problem and needs to be repaired.'
DITL_-8173.txt
Items: (3 entries)
0:
Bounds: x1=380, y1=60, x2=444, y2=78
Type: 4
Info: 'Continue'
1:
Bounds: x1=380, y1=33, x2=444, y2=51
Type: 4
Info: 'Cancel'
2:
Bounds: x1=62, y1=7, x2=370, y2=80
Type: -120
Info: 'The LaserWriter IISC is still warming up. Please wait for a steady green light on the printer and then click Continue.'
DITL_-8174.txt
Items: (3 entries)
0:
Bounds: x1=380, y1=60, x2=444, y2=78
Type: 4
Info: 'Continue'
1:
Bounds: x1=380, y1=33, x2=444, y2=51
Type: 4
Info: 'Cancel'
2:
Bounds: x1=62, y1=7, x2=370, y2=80
Type: -120
Info: 'The LaserWriter IISC’s toner cartridge is not installed properly. Please reinstall it, close the top of the printer, wait for a steady green light on the printer, then click Continue.'
DITL_-8175.txt
Items: (3 entries)
0:
Bounds: x1=380, y1=65, x2=444, y2=83
Type: 4
Info: 'Continue'
1:
Bounds: x1=380, y1=38, x2=444, y2=56
Type: 4
Info: 'Cancel'
2:
Bounds: x1=62, y1=7, x2=371, y2=90
Type: -120
Info: 'The Macintosh can’t communicate with the LaserWriter IISC. Please check the cables, switch the printer off and then on again, wait for a steady green light on the printer, then click Continue.'
DITL_-8176.txt
Items: (3 entries)
0:
Bounds: x1=380, y1=60, x2=444, y2=78
Type: 4
Info: 'Continue'
1:
Bounds: x1=380, y1=33, x2=444, y2=51
Type: 4
Info: 'Cancel'
2:
Bounds: x1=62, y1=7, x2=370, y2=80
Type: -120
Info: 'The LaserWriter IISC has a paper jam. Please clear it, close the top of the printer, wait for a steady green light on the printer, then click Continue.'
DITL_-8177.txt
Items: (3 entries)
0:
Bounds: x1=380, y1=60, x2=444, y2=78
Type: 4
Info: 'Continue'
1:
Bounds: x1=380, y1=33, x2=444, y2=51
Type: 4
Info: 'Cancel'
2:
Bounds: x1=62, y1=7, x2=370, y2=80
Type: -120
Info: 'The top of the LaserWriter IISC is open. Please close it, wait for a steady green light on the printer, then click Continue.'
DITL_-8178.txt
Items: (3 entries)
0:
Bounds: x1=380, y1=60, x2=444, y2=78
Type: 4
Info: 'Continue'
1:
Bounds: x1=380, y1=33, x2=444, y2=51
Type: 4
Info: 'Cancel'
2:
Bounds: x1=62, y1=7, x2=370, y2=80
Type: -120
Info: 'The LaserWriter IISC is out of paper. Please add paper, wait for a steady green light on the printer, then click Continue.'
DITL_-8179.txt
Items: (3 entries)
0:
Bounds: x1=380, y1=70, x2=444, y2=88
Type: 4
Info: 'Continue'
1:
Bounds: x1=380, y1=43, x2=444, y2=61
Type: 4
Info: 'Cancel'
2:
Bounds: x1=62, y1=7, x2=371, y2=91
Type: -120
Info: 'No LaserWriter IISC is available. Please check that the printer is properly connected and switched on, make sure its priority number does not conflict with other SCSI devices on your system, then click Continue.'
DITL_-8180.txt
Items: (3 entries)
0:
Bounds: x1=380, y1=60, x2=444, y2=78
Type: 4
Info: 'Continue'
1:
Bounds: x1=380, y1=33, x2=444, y2=51
Type: 4
Info: 'Cancel'
2:
Bounds: x1=62, y1=7, x2=370, y2=80
Type: -120
Info: 'Error in LaserWriter IISC memory; service may be required, and printed material may show defects.'
DITL_-8181.txt
Items: (3 entries)
0:
Bounds: x1=380, y1=70, x2=444, y2=88
Type: 4
Info: 'Continue'
1:
Bounds: x1=380, y1=43, x2=444, y2=61
Type: 4
Info: 'Cancel'
2:
Bounds: x1=62, y1=7, x2=370, y2=90
Type: -120
Info: 'The LaserWriter IISC’s paper cartridge is not installed properly. Please make sure it contains paper; then reinstall it, wait for a steady green light on the printer, and click Continue.'
DITL_-8182.txt
Items: (3 entries)
0:
Bounds: x1=483, y1=3, x2=543, y2=21
Type: 4
Info: 'OK'
1:
Bounds: x1=380, y1=25, x2=440, y2=43
Type: 4
Info: 'Cancel'
2:
Bounds: x1=62, y1=7, x2=370, y2=50
Type: -120
Info: 'This print job cannot be completed. Please click Cancel, then try again.'
DITL_-8183.txt
Items: (4 entries)
0:
Bounds: x1=360, y1=4, x2=420, y2=22
Type: 4
Info: 'Auto'
1:
Bounds: x1=473, y1=4, x2=531, y2=22
Type: 4
Info: 'Offscreen on purpose'
2:
Bounds: x1=62, y1=7, x2=354, y2=72
Type: -120
Info: 'Please feed the next sheet of paper into the manual feeder when the red light is blinking. Click Auto to change to automatic feed.'
3:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_-8184.txt
Items: (2 entries)
0:
Bounds: x1=392, y1=12, x2=444, y2=32
Type: 4
Info: 'OK'
1:
Bounds: x1=62, y1=7, x2=372, y2=80
Type: -120
Info: 'LaserWriter IISC software by David Cásseres, with a lot of help from scott douglass, Bayles Holt, & Nik Bhatt.'